Samura Sharpening Stone with Grit 2000

Samura Grit 2000 Sharpening Stone. Samura sharpening stones are suitable even for very hard blades with a hardness of 58 HRC or higher. All grit particles of this sharpening stone are completely homogeneous to ensure a uniform and high-quality cut. When sharpening, start with a coarse grit and then move to progressively finer grits. It is ideal if each subsequent grit is 2 to 3 times finer.

To prevent the stone from slipping off the work surface during sharpening, it is supplied with a non-slip support.

Read moreShow less
Reference:
171090000
Brand:

short time Envío: 1 SEMANA

€29.73

This can be taken as a guideline value:

  • For coarse work - slotting or if the tool is very dull, a grit stone of 120 to 400 is recommended.
  • For normal sharpening tasks, a grit stone of 700 to 2000 is suitable.
  • To remove fine burrs and polish surfaces, use grit sizes 3000 to 12000.
Read moreShow less
171090000

Data sheet

Long
18 mm.
Ancho
60 mm.
Height
30 mm.
16 other products in the same category:
Discover the power and tradition of the High-Quality Professional Oak Flint, the Fire Striker (Army) by Casström, an essential tool for your outdoor adventures.This magnificent flint is made with traditional natural...
Albainox Magnesium Flint. When nature shows its most challenging side, you need tools you can rely on. The Albainox magnesium flint is your perfect ally to ignite that vital fire, even when conditions seem...
Sharpening stone with dimensions of 12x4x2 (x2) cm. with grain of 1200 (sharpening) and 1800 (polishing). Designed format so that with a single tool we have an effective sharpening solution. Composed of 50% natural...

Menu

Settings