Samura Sharpening Stone with 5000 Grit

Samura sharpening stone with 5000 grit. Samura sharpening stones are suitable even for very hard blades with a hardness of 58 HRC or higher. All grains of this sharpening stone are completely homogeneous to ensure a uniform and high-quality cut. When sharpening, start with a coarse grit and then move to progressively finer grits. It is ideal if each subsequent grit is 2 to 3 times finer. To prevent the stone from slipping off the work surface during sharpening, it is supplied with a non-slip support.
Read moreShow less
Reference:
171080000
Brand:

short time Envío: 1 SEMANA

€41.12
This can be taken as a guideline: - For coarse work - grinding of gun sights or if the tool is very dull, a stone with grit 120 to 400 is recommended. - For normal sharpening tasks, a stone with grit 700 to 2000 is suitable. - To remove fine burrs and polish surfaces, use grit sizes 3000 to 12000.
Read moreShow less
171080000

Data sheet

Long
18 mm.
Ancho
60 mm.
Height
30 mm.
16 other products in the same category:
Albainox Magnesium Flint. When nature shows its most challenging side, you need tools you can rely on. The Albainox magnesium flint is your perfect ally to ignite that vital fire, even when conditions seem...
Magnesium Flint with Accessories from Albainox. When adventure takes you to the most challenging corners of nature, you need tools that not only fulfill their primary function but go beyond. The magnesium flint with...
If you are looking for a practical and efficient knife sharpener, the plastic handle knife sharpener from the Albainox brand is an excellent choice.With a size of 24.5 cm, this sharpener allows you to sharpen your...
When nature shows its most challenging side, you need tools that are up to the task. The magnesium fire steel by Albainox has been specifically designed for those moments, guaranteeing fire even in the most adverse...

Menu

Settings