Samura sharpening stone with grit 8000

Samura grit 8000 sharpening stone. Samura sharpening stones are suitable even for very hard blades with a hardness of 58 HRC or higher. All grains of this sharpening stone are completely homogeneous to ensure a uniform and high-quality cut. When sharpening, start with a coarse grit and then move to progressively finer grits. It is ideal if each subsequent grit is 2 to 3 times finer. To prevent the stone from slipping off the work surface during sharpening, it is supplied with a non-slip support.
Read moreShow less
Reference:
171070000
Brand:

short time Envío: 2 SEMANAS

€37.38
This can be taken as a guideline value: - For coarse work - slot grinding or if the tool is very dull, a grit stone from 120 to 400 is recommended. - For normal sharpening tasks, a grit stone from 700 to 2000 is suitable. - To remove fine burrs and polish surfaces, use grit sizes from 3000 to 12000.
Read moreShow less
171070000

Data sheet

Long
18 mm.
Ancho
60 mm.
Height
30 mm.
16 other products in the same category:
Samura sharpening stone with 400 grit. Samura sharpening stones are suitable even for very hard blades with a hardness of 58 HRC or higher. All grains of this sharpening stone are completely homogeneous to ensure a...
Albainox Magnesium Flint. When nature shows its most challenging side, you need tools you can rely on. The Albainox magnesium flint is your perfect ally to ignite that vital fire, even when conditions seem...
If you are looking for a high-quality sharpening stone with a touch of style, the Top Cutlery multicolor sharpening stone is the perfect choice for you. Featuring a colorful design that adds a touch of joy to your...
Samura Sharpening Stone Grain 1000/3000. With this high-quality combined sharpening stone from Samura, you can perform preliminary sharpening and fine polishing of your knives, ensuring an exceptional result. The 1000...

Menu

Settings