Samura Coarse Grain Whetstone 1000

Samura Coarse Grain Whetstone 1000. Samura sharpening stones are suitable even for very hard blades with a hardness of 58 HRC or higher. All grains of this sharpening stone are completely homogeneous to ensure a uniform and high-quality cut. When sharpening, start with a coarse grain and then move to progressively finer grains. It is ideal if each subsequent grain is 2 to 3 times finer.

To prevent the stone from slipping off the work surface during sharpening, it is supplied with a non-slip support.

Read moreShow less
Reference:
171100000
Brand:

short time Envío: 2 SEMANAS

€25.48

This can be taken as an approximate value:

  • For rough work - grinding of gun sights or if the tool is very dull, a stone with grain 120 to 400 is recommended.
  • For normal sharpening tasks, a stone with grain 700 to 2000 is suitable.
  • To remove fine burrs and polish surfaces, use grain sizes 3000 to 12000.
Read moreShow less
171100000

Data sheet

Long
18 mm.
Ancho
60 mm.
Height
30 mm.
16 other products in the same category:
When nature shows its most challenging side, you need tools that are up to the task. The magnesium fire steel by Albainox has been specifically designed for those moments, guaranteeing fire even in the most adverse...
Albainox Magnesium Flint. When nature shows its most challenging side, you need tools you can rely on. The Albainox magnesium flint is your perfect ally to ignite that vital fire, even when conditions seem...

Menu

Settings