Samura Sharpening Stone with 400 Grit
Samura sharpening stone with 400 grit. Samura sharpening stones are suitable even for very hard blades with a hardness of 58 HRC or higher. All grains of this sharpening stone are completely homogeneous to ensure a uniform and high-quality cut. When sharpening, start with a coarse grit and then move to progressively finer grits. It is ideal if each subsequent grit is 2 to 3 times finer.
To prevent the stone from slipping off the work surface during sharpening, it is supplied with a non-slip support.
NO disponible por el momento
NO disponible por el momento
NO disponible por el momento
NO disponible por el momento
NO disponible por el momento
NO disponible por el momento
NO disponible por el momento
0
unidad
unidades
This can be taken as a guideline:
- For rough work - grinding of notches or if the tool is very dull, a stone with grit 120 to 400 is recommended.
- For normal sharpening tasks, a stone with grit 700 to 2000 is suitable.
- To remove fine burrs and polish surfaces, use grit sizes 3000 to 12000.
Data sheet
- Long
- 18 mm.
- Ancho
- 60 mm.
- Height
- 30 mm.